CEMBRITS SOLUTION FOR RIDGE VENTILATION

Cembrit’s new Continuous Vent Ridge is a practical and aesthetically pleasing fibre cement product, ridge capping solution for pitched roofs. The Continuous Vent Ridge has many advantages over more commonly used ridge cappings. At 3.24 Kg, it is half the weight per linear metre of a concrete or clay ridge covering. Being lightweight, the product is easy to transport and can be carried up to the roof top with ease. At 525mm length it is possible to carry 2 linear metres of ridge covering at a time.

“Our Continuous Vent Ridge is a new product that fills a gap in the market,” says Ged Ferris, Marketing Manager of Cembrit. “It is available in blue/black, the most popular fibre cement slate colour, and comes four different angles, 22.5˚ - 45˚ to allow a neat and tidy finish on the most common roof pitches.”

Cembrit’s Continuous Vent Ridge is simple to install as it is dry fixed with four self drilling screws. In contrast, clay and concrete ridges require on site wet mortaring, which is not only messy, but takes longer and tends not to last long term. Such ridges are usually used with a roll of corrugated material which is fiddly to install and whose long term efficiency has been questioned. This often results in necessary maintenance further down the line. Furthermore, dust suppression equipment is required when cutting these heavier ridges but the Continuous Vent Ridge can be cut with hand tools.

Adhering to roof ventilation provisions is just as important as the design and construction aspects. The BS 5250, Control of Condensation in Buildings Amendment 1, sets out the requirements for the need for roof space ventilation in both warm and cold pitches roofs. Cembrit’s Continuous Vent Ridge has the free air capacity of 5880 mm² which more than exceeds the requirements of BS 5250.

For press information, please contact:

Ged Ferris                                     or              Shereen Russell                     

Cembrit Ltd                                                    Wildwood PR Ltd

57 Kellner Road                                             The Stables, Meadow Court

London                                                            Faygate Lane,

SE28 0AX                                                        Faygate

                                                                        RH12 4SJ

Tel: 020 8301 8900                                         Tel: 01293 851115

Fax: 020 8301 8901                                        Fax: 01293 852448

Email: sales@cembrit.co.uk                           Email: shereen.russell@wildwoodpr.co.uk

Using skills built up over 80 years, Cembrit offers a wide range of fibre cement slates, corrugated sheets, and cladding and building board panels, as well as natural slates.  Our factories operate Environmental Management Systems (EMS) to EN14001. Environmental Product Declarations (EPD) are available on all Cembrit manufactured ranges and Cembrit fibre cement slates are listed on the Greenbooklive.com register of environmental products.  All Cembrit manufactured fibre cement products (slate, corrugated sheet, cladding, building board and associated fibre cement accessories) are manufactured in conformity with the relevant harmonised European Norms  and therefore display a CE mark, performance and technical data on packaging. Quality levels at group factories are rigorously maintained to high standards with many products manufactured under the control of ISO 9001 and British Board of Agrément. Cembrit UK is a member of Cembrit Holding A/S of Denmark. 

Media

Media