Federal-Mogul’s New Lead-Free Bearing Solution Delivers Improved Robustness in Heavy-duty Engines

Bearing materials are optimised for increased load capacity and greater durability

Wiesbaden, Germany, 25 July 2014 - Federal-Mogul Powertrain, a division of Federal-Mogul Holdings Corporation (NASDAQ: FDML), is applying its expertise in light vehicle engine bearings to provide robust, lead-free bearing solutions to the heavy-duty market. The company’s product offering, in which the upper and lower halves of a bearing shell pair are individually optimised, has pioneered the introduction of lead-free bearing materials that offer increased load capacity and wear resistance for these heavy-duty engines. Federal-Mogul will present its range of bearings at the IAA Commercial Vehicles Show in Hannover from September 23rd to October 2nd 2014, hall 13, stand C28.

For today’s bearings, factors such as seizure, adaptability and wear resistance have become as important as load carrying capacity. “By selecting a material with high fatigue resistance for the bearing shell that carries the higher loads, and a material for the counter shell with good embeddability and highly tolerant of particles present in the engine oil, we are able to offer a robust solution,” said Joachim Häring, Federal-Mogul’s manager, application engineering, Bearings, Europe.

The difference in bearing load arises because heavy combustion loads occur only on the upper half of the connected rod and the lower half of a main bearing. Federal-Mogul’s solution provides a coated bearing for the high loaded side combined with an aluminium substrate for the counter (less loaded) shell. Bearing coatings consist of a sputter, polymer or electroplate overlay, which improves engine robustness.

While there is no legislation in place that limits lead in bearings for the heavy-duty sector, Federal-Mogul's extensive experience in lead-free bearings for the light vehicle sector can be easily adapted to satisfy any future proposed legislation for heavy-duty engines. In addition to environmental benefits, lead-free materials also provide improved bearing fatigue life. “Our lead- free bearings use a superior substrate made either from cast or sintered material. To provide a robust solution for rod bearing loads up to 95 MPa previously necessitated a sputtered coating,

but with lead-free materials we can satisfy such requirements while using better value alternatives such as our IROX® polymer coating,” explained Häring. There is a clear market trend for high strength aluminium to replace electroplated bearing materials for the lower main bearing. “IROX can be used as an upgrade to the high strength aluminium, optimising the load capacity and the wear resistance, if needed,” added ‘Häring.

Achieving excellent bearing performance required Federal-Mogul to utilize state-of-the-art testing such as EDX (energy dispersive x-ray) spectroscopy and SEM (scanning electron microscopy). Additionally, EHD (elastohydrodynamic) studies or FEM (Finite Element Methods) were used to optimise the bearing and its environment. Along with the development of lead-free bearing materials, necessary new manufacturing processes and test procedures, such as wear- and embeddability tests, were also introduced.

Federal-Mogul’s first heavy-duty application of lead-free bearings is in series production with one global OEM and being considered by other customers. Heavy-duty engines contain a much higher number of bearing parts compared to passenger car engines, extending beyond the crank train to rocker gear, cam drives and cam bushings. As a result, customers benefit from working with a single supplier such as Federal-Mogul which has a comprehensive system understanding and full bearing material portfolio. “Our extensive experience with lead-free materials in the automotive sector is invaluable,” said Häring. “We have been able to efficiently adapt to the heavy-duty market where vehicle lifetime mileages are much higher, reaching up to

1.5 million kilometres.”

Future trends for heavy-duty engines include higher combustion loads (with peak pressures reaching 250 bar or more); greater use of stop-start and hybrid operation; and thinner oils to improve efficiency and increased wear resistance for longer engine life. Federal-Mogul is well- positioned to meet these future challenges, with developments underway that indicate how current materials can be adapted to satisfy the needs of future engine requirements.

Lead-free bearing materials are developed at Federal-Mogul’s Wiesbaden technology centre in Germany. The facility has nearly 120 years of experience in bearing design and development. As part of Federal-Mogul’s commitment to providing regional support to its global customer base, the company recently announced its acquisition of Russian bearing manufacturer DZV, which provides an excellent growth platform for increased presence in the commercial vehicle and industrial engine market in Eastern Europe.

About Federal-Mogul

Federal-Mogul Holdings Corporation (NASDAQ: FDML) is a leading global supplier of products and services to the world’s manufacturers and servicers of vehicles and equipment in the automotive, light, medium and heavy-duty commercial, marine, rail, aerospace, power generation and industrial markets. The company’s products and services enable improved fuel economy, reduced emissions and enhanced vehicle safety.

Federal-Mogul operates two independent business divisions, each with a chief executive officer reporting to Federal-Mogul's Board of Directors.

Federal-Mogul Powertrain designs and manufactures original equipment powertrain components and systems protection products for automotive, heavy-duty, industrial and transport applications.

Federal-Mogul Motorparts sells and distributes a broad portfolio of products through more than 20 of the world’s most recognized brands in the global vehicle aftermarket, while also serving original equipment vehicle manufacturers with products including braking, chassis, wipers and other vehicle components.  The company’s aftermarket brands include ANCO® wiper blades; Champion® spark plugs, wipers and filters; AE®, Fel-Pro®, FP Diesel®, Goetze®, Glyco®, Nüral®, Payen® and Sealed Power® engine products; MOOG® steering and suspension parts; and Ferodo® and Wagner® brake products.

Federal-Mogul was founded in Detroit in 1899. The company employs more than 45,000 people in 34 countries, and its worldwide headquarters is in Southfield, Michigan, United States. For more information, please visit www.federalmogul.com.

###

CONTACT:               

Marco Foley
Market Engineering
+44 (0)1295 277050
marco.foley@m-eng.com
Ursula Hellstern
Federal-Mogul Corporate Communications EMEA
+49 (611) 201 9190
ursula.hellstern@federalmogul.com

Tags:

About Us

Market Engineering is Europe’s leading specialist marketing communications agency for the automotive technology sector. Founded in 1990 we have a track record of driving client reputation, sales growth and brand value that spans more than twenty years. Our team of qualified engineers and experienced communication professionals provide a unique level of technical accuracy, market understanding and sector-specific expertise that is unmatched by less focused agencies. Additionally, our approach is always strategic and marketing driven. Basing all our public relations and marketing communications activities on this essential foundation allows us to develop compelling and contagious messages and then accurately, powerfully and cost-effectively communicate them. Our clients comprise many highly respected global organisations including: Vehicle manufacturersTier-1 and 2 automotive suppliersAftermarket component and service providersMotorsport teams, manufacturers and suppliersEngineering consultanciesProviders of specialist automotive products and services including logistics and recruitmentWe are proud to say that many clients have been with Market Engineering for more than a decade, a strong testament to the quality of our work and our commitment to continuous improvement.

Contacts

Subscribe

Media

Media