High-quality nanomechanical resonators with built-in piezoelectricity

Report this content

Researchers at Chalmers University of Technology in Sweden and at the University of Magdeburg in Germany have developed a novel type of nanomechanical resonator that combines two important features: high mechanical quality and piezoelectricity. This development could open doors to new possibilities in quantum sensing technologies.

Mechanical resonators have been used for centuries for a multitude of applications. A key aspect of these devices is their ability to vibrate at specific frequencies. A well-known example is the tuning fork. When struck, the tuning fork oscillates at its resonance frequency, producing a sound wave within our hearing range. With advancements in microfabrication techniques, researchers have been able to shrink mechanical resonators down to the micro- and nanometer scale. At these tiny sizes, resonators oscillate at much higher frequencies and exhibit a greater sensitivity compared to their macroscopic counterparts.

“These properties make them useful in precision experiments, for example for sensing minuscule forces or mass changes. Recently, nanomechanical resonators have raised significant interest among quantum physicists due to their potential use in quantum technologies. For example, the use of quantum states of motion would improve the sensitivity of nanomechanical resonators even further,” says Witlef Wieczorek, Professor of Physics at Chalmers University of Technology and project leader of the study.

A common requirement for these applications is that nanomechanical resonators need to sustain their oscillation for long times without losing their energy. This ability is quantified by the mechanical quality factor. A large mechanical quality factor also implies that the resonator exhibits enhanced sensitivity and that quantum states of motion live longer. These properties are highly sought after in sensing and quantum technology applications.

In the quest for a material with a high-quality factor and built-in piezoelectricity

Most of the best-performing nanomechanical resonators are made from tensile-strained silicon nitride, a material known for its outstanding mechanical quality. However, silicon nitride is quite “boring” in other aspects: it doesn’t conduct electricity, nor is it magnetic or piezoelectric. This limitation has been a hurdle in applications that require in-situ control or interfacing of nanomechanical resonators to other systems. To address these needs, it is then required to add a functional material on top of silicon nitride. However, this addition tends to reduce the mechanical quality factor, which limits the resonator’s performance.

Now, researchers at Chalmers University of Technology and at the University of Magdeburg, Germany, made a big leap as they demonstrated a nanomechanical resonator made of tensile-strained aluminum nitride, a piezoelectric material that maintains a high mechanical quality factor.

“Piezoelectric materials convert mechanical motion into electrical signals and vice versa. This can be used for direct readout and control of the nanomechanical resonator in sensing applications. It can also be utilized for interfacing mechanical and electric degrees of freedom, which is relevant in the transduction of information, even down to the quantum regime,” says Anastasiia Ciers, research specialist in quantum technology at Chalmers and lead author of the study published in Advanced Materials.

The aluminum nitride resonator achieved a quality factor of more than 10 million.

“This suggests that tensile-strained aluminum nitride could be a powerful new material platform for quantum sensors or quantum transducers,” says Witlef Wieczorek.

The researchers now have two major aims: to improve the quality factor of the devices even further, and to work on realistic nanomechanical resonator designs that enable them to make use of the piezoelectricity for quantum sensing applications.


More information:

Read the scientific article Nanomechanical Crystalline AlN Resonators with High Quality Factors for Quantum Optoelectromechanics published in Advanced Materials.
 

Fact box: About the aluminum nitride-based nanomechanical resonators

The researchers used a highly stressed 295 nanometer-thin film of aluminum nitride for fabricating their nanomechanical resonators. The stress was about 1GPa, the equivalent of balancing two elephants on a fingernail. The researchers used this high stress in a technique called dissipation dilution, which boosts the mechanical quality factor. The aluminum nitride film was epitaxially grown on a silicon substrate, which ensures a high crystalline quality of the film to preserve the piezoelectricity of aluminum nitride. They created a novel resonator design, called triangline, that looks like a fractal-like structure with a central triangular-shaped pad. This triangline resonator can maintain a single quantum coherent oscillation at room temperature, which is an important benchmark for its application in quantum technology.

For more information, please contact:


Anastasiia Ciers, research specialist in Quantum Technology at the Department of Microtechnology and Nanoscience at Chalmers University of Technology
anastasiia.ciers@chalmers.se

Witlef Wieczorek, Professor of Physics at the Department of Microtechnology and Nanoscience at Chalmers University of Technology.
witlef.wieczorek@chalmers.se
+46 31 772 67 72

The researchers both speak English, whilst Witlef speaks German and Swedish and Anastasiia speaks Russian. They are available for live and pre-recorded interviews. At Chalmers, we have podcast studios and broadcast filming equipment on site and would be able to assist a request for a television, radio or podcast interview.

Illustration caption: The image shows an illustration of a triangline nanomechanical resonator realized in a piezoelectric material. The central part of the resonator is shaped like a triangle that moves up and down and at the same time acts as a mirror to reflect a laser beam.  The resonator is suspended by thin tethers, which are branched to minimize the loss of mechanical energy from the triangline's movement.

Illustration credit: Chalmers University of Technology | Boid

Emma Fry
Press Officer
+46 31 772 50 28
emma.fry@chalmers.se

________________

Chalmers University of Technology in Gothenburg, Sweden, conducts research and education in technology and natural sciences at a high international level. The university has 3100 employees and 10,000 students, and offers education in engineering, science, shipping and architecture.

With scientific excellence as a basis, Chalmers promotes knowledge and technical solutions for a sustainable world. Through global commitment and entrepreneurship, we foster an innovative spirit, in close collaboration with wider society.

Chalmers was founded in 1829 and has the same motto today as it did then: Avancez – forward.

---

Images provided in Chalmers University of Technology press releases are, unless specified otherwise, free for download and publication as long as credit is given to the University and the individual creator. Cropping and rescaling of the images is permitted when required for adaptation to the publication’s format, but modifications that would influence the message and content of the original are not. The material is primarily intended for journalistic and informative use, to assist in communication and coverage of Chalmers’ research and education. Commercial usage, for example the marketing of goods and services, is not permitted.

We kindly request credit to be given in the following format where possible:

Image/Graphic/Illustration: Chalmers University of Technology | Name Surname