Trelleborg Sealing Solutions launches seal material that gives optimum performance against ceramic coated rods in hydraulic aerospace applications
News Release
For Immediate release: July 2012
Trelleborg Sealing Solutions launches Turcon® M30 sealing material, which is engineered to withstand and optimize performance against the extremely hard ceramic coatings that are the eco-friendly alternatives to chrome plating of rods in hydraulic aerospace applications. Tests prove that the new compound increases seal life to reduce planned maintenance, extend flight hours and ultimately lower costs.
Turcon® M30 Polytetrafluoroethylene (PTFE) based sealing material has been developed after an extensive test program by Trelleborg Sealing Solutions to meet the sealing challenges posed by hard ceramic mating surfaces. It offers unrivaled performance at the higher hydraulic pressures of modern aircraft, now up to 5,000 psi, and meets the extended expected working life of actuators of up to 60,000 flight hours or more.
Director of Technology at Trelleborg Sealing Solutions Americas, Colin Macqueen, says: “As more and more customers are seeking to eliminate chrome from their processes and components for environmental reasons, Trelleborg Sealing Solutions is being asked to provide seals that can be applied against a wide range of alternative surface coatings and treatments.
“Many of these, such as HVOF (High Velocity Oxy-Fuel) applied ceramic coatings, are abrasive and can quickly erode some seal materials. Working together with our customers and the surface treatment providers, Trelleborg identified the need for a new enhanced seal material that can demonstrate long life when working in such applications.
“The result was Turcon® M30, which will not only ensure long life with low wear against hard ceramic mating surfaces in hydraulic cylinders and actuators, but will also excel under the ever-increasing pressures seen in today's aircraft systems.”
The U.S. Environmental Protection Agency (EPA) lists chromium as one of the 17 most toxic chemicals. As chromium is classified as carcinogenic, chrome-plated rods in hydraulic cylinders are being replaced with ceramic-coated ones using the High Velocity Oxygen Fuel (HVOF) process. Chrome is inherently porous so stores lubricant, prolonging the life of seals. The extremely hard, denser surface of tungsten carbide HVOF makes sealing more challenging.
The development program to prove Turcon® M30 involved back-to-back testing of Polytetrafluoroethylene (PTFE), Polyether ether ketone (Victrex® PEEK), Polyamide (PA) and Polyethylene (PE) compounds with various fillers. Materials were tested on a 5,000 psi test rig and factors including leakage, abrasion and wear were examined.
Turcon® M30 is the preferred Trelleborg sealing material for hydraulic applications in aerospace flight controls and landing gear. It has operating temperatures from –196 °C to +260 °C/ –320 °F to +500 °F and is capable of withstanding pressures up to 35 MPa/ 5,000 psi for prolonged periods.
ENDS
For more information or high resolution images, please contact:
Donna Guinivan, Editor PR and Media
Telephone: +44 (0)121 746 3621 Email: donna.guinivan@trelleborg.com
For press releases from the whole of Trelleborg Group, visit the Trelleborg Media Center. The Products and Solutions section allows you to select news by industry. Go to www.trelleborg.com/news where you can also subscribe to our newsletter.
Information about Trelleborg Sealing Solutions and Trelleborg Group
Trelleborg Sealing Solutions is one of the world’s leading developers, manufacturers and suppliers of precision seals. It supports its aerospace, industrial and automotive customers through over 20 production facilities and more than 40 marketing companies globally. Within its portfolio are some of the longest established sealing brands, including Busak+Shamban, Chase Walton, Dowty, Forsheda, GNL, Palmer Chenard, Shamban, Skega and Stefa along with a large number of proprietary products and materials such as TurconÒ, ZurconÒ, OrkotÒ, IsolastÒ, StepsealÒ and Wills RingsÒ. www.tss.trelleborg.com
Trelleborg is a global industrial group whose leading positions are based on advanced polymer technology and in-depth applications know-how. Trelleborg develops high-performance solutions that seal, damp and protect in demanding industrial environments. The Trelleborg Group has annual sales of about SEK 22 billion (EUR 2.4 billion, USD 3.3 billion) with about 15,500 employees in over 40 countries. The Group comprises three business areas: Trelleborg Sealing Solutions, Trelleborg Wheel Systems, and Trelleborg Engineered Systems. In addition, Trelleborg owns 50 percent of TrelleborgVibracoustic, a global leader within antivibration solutions for light and heavy vehicles, with annual sales of SEK 13 billion (EUR 1.4 billion, USD 2.0 billion) and about 8,000 employees in 17 countries. The Trelleborg share has been listed on the Stockholm Stock Exchange since 1964 and is listed on the NASDAQ OMX Nordic List, Large Cap. www.trelleborg.com
Tags: