Ash clean-up for robot at H+H UK Ltd
Getting down and dirty in ash is one process that personnel at H+H UK Limited, Goole, are pleased to leave to a new Kawasaki industrial robot. Manufacturing its market leading Aircrete Building Blocks from a mixture of pulverised fuel ash (PFA), cement and lime creates an aggressive environment for clean-up operations.
The H+H factory in Goole was commissioned by Hess in 2001 and incorporated a Kawasaki JS30 robot dating from the mid ‘90s originally installed at an H+H facility in the Netherlands. The new Kawasaki RS80N robot is a ‘swap out’ to replace the original Kawasaki JS30 mould cleaning robot.
The operation requires the robot to remove all ‘slurry’ residue from a mould, 6 metre long by 1.2 metre wide by 700mm deep, before it proceeds back to the moulding operation where a new slurry mix is poured. At this stage the slurry is beginning to set and is particularly abrasive. The process also requires the spraying of oil to the sides of the mould as a release agent and to help convert any residue to a mixable consistency. Powered, rotating brushes are passed over the entire surface of the mould to agitate the residue and oil mix providing a clean and even coating over the surface.
Installed within a fully enclosed spray booth, the Kawasaki RS80N robot is mounted on an 8 metre linear axis which follows the length of the mould. The robot has a selection of two different powered brushes, one for the base and one for the sides of the mould, which it automatically changes during the process. A spray head mounted to the robot arm allows oil to be sprayed to the sides and base of the mould during the process.
David Lazenby, Systems Support Engineer, H+H, explains, “The system has evolved, since originally being engineered, into a 60Kg payload requirement; the addition of a more efficient tool change mechanism several years ago contributed to a payload of 30kgs over the robots specified maximum. Regardless of this the robot operated on site without fault for 12 years until just before the swap out.
“The new robot is specified well within requirement as it has a payload capacity of 80Kg. The process can be completed in 3 minutes but the process demand allows it to operate at a comfortable 4.5 minutes. During the robot installation the operation was carried out manually taking one man 10 minutes and two men 6 minutes.”
The process is very aggressive with the mixture of oil spray and abrasive paste contained within the enclosure. David Lazenby explains that to maintain production the robot operates continuously, “The Kawasaki robot’s design is ideal for this application; all wrist motors are enclosed and IP67 rated. The robot is cleaned weekly as part of our preventative maintenance and cleaning routines but other than this requires minimal intervention.”
Operator and maintenance interface with the system has been improved with the addition of the Kawasaki E-Series robot controller which has allowed more flexible and easier programming. Sub-routine pages have now been created for every production and maintenance situation allowing straight-forward unplanned intervention and recovery for engineers and operators without programming skills.
In summary David Lazenby explains, “The new robot is more sophisticated than the previous robot and in particular allows more control options; however our system is relatively straight-forward and does exactly what we want without unnecessary complications being introduced. The fact it can just be left to do the job without clean-down is an important element reducing the requirement for needless downtime and additional maintenance operations.”
Ref: Ka-016-A
Issue date: January 2013
Photography and graphics: See links at the bottom of this e-mail or
Contact: Katiel@jonoliver.com for high resolution image file.
Issued by:
Katie Lees, Jon Oliver Communication Ltd. +44-(0)1902-757115
Further information:
Jim Carr, UK Sales and Marketing Manager, Kawasaki Robotics UK Ltd
Unit 4, Easter Court, Europa Boulevard, Warrington WA5 7ZB
Tel +44 (0)1925 713000 email: sales@kawasakirobotuk.com
Visit our web site: www.kawasakirobot.co.uk
Notes to editors:
Kawasaki Robotics (UK) Ltd is the UK robotics division of Kawasaki Heavy Industries Japan.
Based in Warrington, Kawasaki Robotics (UK) Ltd occupies a 15,000 Sq. Ft. Building. Its location provides easy access to the main motorway network and is at the centre of its customer base.
The facility centralises all the sales and customer support operations, with areas for customer demonstrations, training, robot test and integration and a large area for stock machines. Over 1,800 machines are now operating in a wide range of industries and applications throughout the UK.
Operating through a network of system partners, automation integrators and also supplying direct to end users, Kawasaki Robotics (UK) Ltd offers experience in the widest range of industry sectors.
Kawasaki Heavy Industries introduced its first industrial robot into the Japanese domestic market in 1969 and since then has developed into a world leader in the manufacture of industrial robots. Renowned world-wide for quality and technology in all its engineering systems and products, this philosophy is continued throughout the Kawasaki Robotics divisions.
Tags:
