Metso Outotec supports Rio Tinto with breakthrough technology for low-carbon iron making

Metso Outotec Corporation’s press release on December 15, 2022, at 11:00 a.m. EET

Metso Outotec is working with Rio Tinto on the development of the BioIron^TM project for low-carbon iron making. As recently announced by Rio Tinto, process effectiveness of the novel low-carbon iron-making process has been successfully proven by small-scale pilot tests, which were conducted at Metso Outotec’s research center in Frankfurt, Germany. Extensive process tests were conducted by a project team from Rio Tinto, Metso Outotec and the University of Nottingham. The next step is to run process trials on a continuous pilot plant with a capacity of one tonne per hour. Metso Outotec is also engaged in the design of the pilot plant, leveraging process and equipment design expertise available within the company.

“The BioIron^TM process is an important breakthrough in direct reduction technologies for iron ore fines. The process uses biomass, such as agricultural by-products, instead of metallurgical coal as a reductant, and microwave energy to convert Rio Tinto’s Pilbara iron ore to metallic iron. From the development point of view, it has been an exciting journey also for Metso Outotec – starting from the installation of the test rig in our research facilities to transferring the learnings to a continuous plant design concept while working hand in hand with Rio Tinto and microwave specialists fro the University of Nottingham. The project aligns well with our commitment to develop technologies for decarbonization of the iron and steel industry,” says Matthias Gabriel, Director, Ferrous at Metso Outotec.

He adds: “For Metso Outotec, using biomass and microwave energy is an interesting route for decarbonizing the iron-making value chain. Another promising solution is the Metso Outotec Circored™ process, which is a 100% hydrogen-based process for the direct reduction of iron ore fines.” This reduction process, when coupled with our DRI Smelting technology, has high potential to reduce the carbon footprint of the traditional blast furnace steel-making route. Metso Outotec also recently introduced its NextGen Pelletizing™ process that provides an 80 to 90% reduction in the agglomeration-related CO₂ emissions. All of these processes are part of the company’s Planet Positive offering focusing on environmentally efficient technologies.

Read more about Metso Outotec’s solutions for metals refining on our website.

Further information:

Matthias Gabriel, Director, Ferrous, Metso Outotec, tel. +49 172 688 9810, email: matthias.gabriel(at)mogroup.com

Helena Marjaranta, Vice President, Communications and Brand, Metso Outotec, tel. +358 20 484 3212, email: helena.marjaranta(at)mogroup.com

Metso Outotec is a frontrunner in sustainable technologies, end-to-end solutions and services for the aggregates, minerals processing and metals refining industries globally. By improving our customers’ energy and water efficiency, increasing their productivity, and reducing environmental risks with our product and process expertise, we are the partner for positive change. Metso Outotec is committed to limiting global warming to 1.5°C with Science Based Targets.

Headquartered in Helsinki, Finland, Metso Outotec employs over 15,000 people in more than 50 countries and its sales for 2021 were about EUR 4.2 billion. The company is listed on the Nasdaq Helsinki. mogroup.com, twitter.com/metsooutotec