Scania becomes world’s first truck OEM to reuse components on main assembly line
Milestone gearbox ‘remanufacturing’ project consumed about 50 percent less material and roughly 45 percent fewer carbon emissions compared with making brand-new one. Project shows it is possible to integrate remanufactured components directly into the production lines of new vehicles.
In a world’s first for heavy vehicle makers, Scania’s has integrated reused components on its main assembly line in Sweden.
The historic achievement took place earlier this year as part of the iReGear joint research project with KTH Royal Institute of Technology and Scandinavian Transmission Service AB, and was made possible with funding from Vinnova, the Swedish innovation agency.
The ‘remanufactured’ gearbox was subject to exactly the same rigorous steps and inline quality and function tests as gearboxes that are made from entirely new parts. It was assessed on the same test rig used for new ones, with monitoring of some 100 quality and function parameters.
The gearbox duly met all those requirements and could therefore be confirmed as being ‘as good as new’, which ensures that it meets the quality and performance standards for being installed on Scania vehicles.
As well as the remanufactured gearbox being as good as new, the actual production process showed tremendous environmental advantages. While replacement rates during gearbox remanufacturing can vary between roughly 10 percent to 100 percent depending on wear-and-tear history, this particular gearbox consumed approximately 50 percent less material and caused 45 percent fewer carbon emissions compared with gearboxes made only with new components.
Remanufacturing, which sees the reuse of old parts to create new products with as-good-as-new quality, is viewed by the automotive industry as a promising strategy for achieving climate goals and supporting the transition towards a circular economy. It also addresses increasing resource scarcity issues. In spite of its great potential, remanufacturing in the European automotive sector is mainly confined to making spare parts for aftermarkets, which account for only 1.1 percent of new manufacturing according to the report by the European Remanufacturing Network (2015) .
The wider adoption of the process requires vehicle manufacturers to integrate the remanufactured components directly into the production lines of new vehicles, rather than using them separately in sales to the aftermarket business. It is hoped that the pioneering iReGear project will help lead the way for the industry to make this necessary shift in the efforts to create a more sustainable and cleaner transport industry.
“What an achievement by the project and everyone involved. This remanufactured gearbox is a compelling example of how the manufacturing of heavy vehicles can become more sustainable, circular and efficient, while still retaining the highest quality standards,” says Fredrik Nilzén, Head of Sustainability at Scania.
“This research provides the first evidence to support the argument that it is feasible to envision future manufacturing organizations seamlessly integrating manufacturing and remanufacturing operations to develop Circular Manufacturing Systems that consume fewer resources, produce fewer emissions, and cost less without compromising quality and performance”, says Farazee Asif, Assistant Professor at KTH.
“STS has been remanufacturing gearboxes for more than 50 years. It’s amazing to be able to challenge the old perception that remanufactured parts only can be used for aftermarket purposes. Today, we can proudly reflect on a period of successful collaboration, where we have achieved breakthroughs in sustainable technology. This project truly shows that it might not need to stop at just one idea, but it could become a reality in the near future,” says Ola Stålebo, CEO, Scandinavian Transmission Service AB.
About the iReGear project
The iReGear project took place between September 2023 and May 2024, and was funded by Vinnova, Sweden’s innovation agency. The project was co-ordinated by KTH Royal Institute of Technology and also involved Scania and Scandinavian Transmission Service AB.
For further information please contact
Erik Bratthall
Corporate Public and Media Relations manager, Scania
erik.bratthall@scania.com
Jenny Linde, General Manager, Scandinavian Transmission Service AB
jenny.linde@stsab.net
Farazee Asif, Assistant Professor, KTH
aasi@kth.se
Scania is a world-leading provider of transport solutions. Together with our partners and customers, we are driving the shift towards a sustainable transport system. In 2023, we delivered 91,652 trucks, 5,075 buses and 13,871 industrial and marine power systems to our customers. Our total net sales in 2023 were more than SEK 204 billion, of which about 20 percent related to services. Founded in 1891, Scania now operates in more than 100 countries and employs some 58,000 people. Research and development is carried out globally, and our main site is located in Södertälje, Sweden. Production takes place in Europe and Latin America with regional product centres in Africa and Asia. Scania is part of TRATON GROUP. For more information visit: www.scania.com.
