Water repellent WISA-SpruceWR facilitates construction in varying humidity conditions

Report this content

UPM's WISA-SpruceWR

The water repellent Surface of WISA-SpruceWR slows doen the absorption of moisture into the panel.

The water repellent Surface of WISA-SpruceWR slows doen the absorption of moisture into the panel.

Water repellent WISA-SpruceWR facilitates construction in varying humidity conditions

(UPM, Helsinki, 9 June 2020 at 11:00 EET) – UPM Plywood introduces a new water repellent WISA-SpruceWR plywood that enables efficient and effortless construction even in changing weather and humidity conditions. The water repellent yet breathable surface of WISA-SpruceWR slows down the absorption of moisture into the panel while allowing it to evaporate. Thanks to the wood-based treatment agent, WISA-SpruceWR is a genuinely sustainable and safe choice made from renewable raw materials.

Designed for structural uses, WISA-SpruceWR provides significant benefits especially for developers and builders.  

“Wood construction is growing in popularity and we want to offer innovative and responsible solutions to it. Our water repellent WISA-SpruceWR plywood can withstand momentary exposure to rain without the need to immediately protect it from getting wet. The builders at the site can focus on the actual construction work as they no longer need to spend time covering materials when the weather changes,” says Olli Wirén, End Use Manager at UPM Plywood.

WISA-SpruceWR is available in four common thicknesses (12–21 mm), in both straight-edged and easy-to-install tongue-and-groove options. Made entirely of spruce, WISA-SpruceWR’s technical properties are the same as those of regular WISA-Spruce plywood: the panel’s strength and light weight make it ideal for all kinds of frame construction, such as walls and floors.

The water repellent treatment of WISA-SpruceWR further enhances the excellent properties of spruce plywood.

“Wood swells when it gets wet, which can cause problems and extra work in construction. Thanks to the water repellent treatment on the surfaces and edges, WISA-SpruceWR retains its dimensional accuracy and shape better in case of sudden rain and also recovers faster than usual. The construction work becomes easier and faster when the worked edges lock in place more securely during installation, the seams remain tight and the panel does not require a long time to stabilise before installation,” says Riku Härkönen, Product Manager at UPM Plywood.

A responsible and safe choice

The water repellent treatment applied to WISA-SpruceWR during manufacturing is done with a wood-based substance that contains no harmful chemicals.

“The panel’s water repellent coating is breathable, which means that it also allows moisture to evaporate.  And because less moisture is absorbed into the panel, it also dries faster than usual. The evaporation of moisture from the wood prevents possible structural and health problems later on,” Härkönen points out.

WISA-SpruceWR is made in Finland at UPM Plywood’s Pellos Mill from wood sourced from responsibly managed forests.

Third-party verified and internationally comparable Environmental Product Declarations (EPDs) are available for all UPM’s WISA plywood products. These EPDs help contractors, builders, and designers to better understand the products’ environmental impact throughout their whole lifecycle, from raw material sourcing to disposal. UPM Plywood’s EPDs have been created for four product groups: coated and uncoated spruce plywood, and coated and uncoated birch plywood.

In Finland, UPM Plywood’s EPDs have been approved and published by the Building Information Foundation RTS sr. The EPDs have also been published on the international ECO Platform EPD list. Therefore, they have been approved in all European EPD programmes that are part of the system.

Water repellent WISA-SpruceWR plywood is available in all well-equipped stores that sell construction materials and timber.

Read more about the product

Watch the video in Youtube

For further information please contact:
Olli Wirén, End Use Manager, UPM Plywood, puh. +358 407 635 382, olli.wiren@upm.com
Riku Härkönen, Product Manager, UPM Plywood, puh. +358 407 057 991, riku.harkonen@upm.com

UPM Plywood offers high quality WISA® plywood and veneer products for construction, vehicle flooring, LNG shipbuilding, parquet manufacturing and other industrial applications. In 2019 UPM Plywood sales was EUR 450 million and it had around 2,400 employees. UPM has six plywood mills and one veneer mill in Finland as well as plywood mills in Russia and Estonia. – www.wisaplywood.com

Follow UPM Plywood on  Twitter | YouTube | Instagram | Facebook

UPM
We deliver renewable and responsible solutions and innovate for a future beyond fossils across six business areas: UPM Biorefining, UPM Energy, UPM Raflatac, UPM Specialty Papers, UPM Communication Papers and UPM Plywood. As the industry leader in responsibility we are committed to the UN Business Ambition for 1.5°C and the science-based targets to mitigate climate change. We employ 18,700 people worldwide and our annual sales are approximately EUR 10.2 billion. Our shares are listed on Nasdaq Helsinki Ltd. UPM Biofore – Beyond fossils. www.upm.com

Follow UPM on Twitter | LinkedIn | Facebook | YouTube | Instagram | #UPM #biofore #beyondfossils



Tags:

Subscribe

Media

Media