US/UK/Canada

Share

Contacts

  • SSAB
    Klarabergsviadukten 70 D6 P.O Box 70 SE-101 21 Stockholm
    +46 (0) 8 454 57 00
    +46 (0) 8 454 57 25
    http://www.ssab.com
  • Charlotte Lindevall

    Head of External Communications


    +46 70 344 5973
    http://ssab.com
  • Tobias Wagner

    Press officer


    +46 76 766 0604
  • Atte Kaksonen

    Press officer, Helsinki


    +358 50 3143 634

    • Quotes

    The new wire and electrode products make our Duroxite® product range even more versatile for wear part manufacturers and industries performing wear part maintenance and repairs. The Duroxite® portfolio now covers overlay plates with different hardfacing materials, overlay pipes, overlay pins, welding wire and electrodes.
     Lingyun Wei, Global Product Manager Duroxite®
    Duroxite® 200 WIRE is mainly used for capping, routine maintenance or repair work. It can be welded on mild steel, Q&T steels, cast materials and stainless steel. Duroxite® 200 WIRE is easy to apply on site or in the workshop.
    Lingyun Wei, product manager at SSAB
    In addition to a wide thickness range, Docol hot rolled AHSS makes it possible to drastically increase the tensile strength in a component, while reducing the amount of material needed to produce it. This can result in a significant reduction in weight, while achieving the same performance and a lower cost, thanks to less material needed overall
    Daniel Sund, Product Manager Hot Rolled Products, SSAB
    “We have seen that these steels have excellent fatigue properties which ensure durability and a long life time”
    Daniel Sund
    Customers choosing My Inner Strenx members as their suppliers will get advanced products with materials, processing techniques and performance optimized to their needs.
    Hans Konradsson, Brand Manager Strenx
    We compared Toolox 44 with conventional tool steel alloyed with chromium, molybdenum and vanadium. Toolox produced better results on all points
    Mayank Kumar
    In truth tool vibration is one of the main limiting factors behind increased productivity. The build and stability of today’s machines allow for significantly higher rates. Compared with tools made of conventional materials it’s possible to increase the removal rate significantly by changing to Toolox 44.
    Dr. Lorenzo Daghini
    Pick a time period -
    Tags ( Active)

    SSAB pauses work at construction site in Luleå

    SSAB has once again paused work at the construction site for its new steel mill in Luleå after personal gas detectors registered low levels of hydrogen cyanide. The detected levels have not exceeded applicable occupational exposure limits and are not considered to pose any risk to personnel on site. No work will resume until the situation has been investigated and deemed safe.“The safety of our employees and contractors is our highest priority. The personal gas detectors have registered low levels of hydrogen cyanide. The readings are below occupational exposure limits, and no one working

    ESL Shipping and SSAB’s port operations in Raahe develop safety together

    The long-term safety cooperation between ESL Shipping and the port of SSAB’s Raahe site is visible in everyday operations through open dialogue, joint exercises, and continuous development of working practices. Close collaboration helps anticipate risks and strengthens safety in demanding operating environments. ESL Shipping and Raahe port cooperation. Photos: ESL Shipping ESL Shipping and the port operations of SSAB’s Raahe site have worked closely together on safety for many years. ESL Shipping’s vessels are a near-daily sight in the Port of Raahe, as the company’s handysize

    SSAB initiates reopening of construction site in Luleå after completion of analysis of causes behind disease symptoms

    This week, SSAB is initiating a controlled restart of the steelworks construction in Luleå after completion of the analysis of the causes behind disease symptoms. Extensive measurements have been carried out where no measurement results have shown concentrations above the applicable limit values, neither in air, gases nor in soil except what was previously known. After consultation with experts in the respective fields, the overall analysis is that symptoms have arisen because of a combination of factors, with exposure to fine dust particles from construction activities being the primary

    Information regarding illness cases at SSAB construction site in Luleå

    In connection with groundworks at the construction site of SSAB’s new steel mill in Luleå, a total of approximately 20 individuals employed by subcontractors have reported illness-like symptoms. A subset of these has sought medical attention. SSAB has initiated an extended measurement program to identify the root cause of the symptoms. All work at the construction site is paused as a safety measure. Steel production at the Luleå site is proceeding as normal.A safe work environment is the highest priority for SSAB. SSAB has expanded its program for sampling and measurements in air, soil and

    SSAB Raahe to trial VR to improve workplace safety

    SSAB Raahe is to test the use of virtual reality to improve safety in maintenance work. Working in collaboration with Centria University of Applied Sciences in Ylivieska, SSAB Raahe has created a virtual model of the strip mill walking beam furnace, where slabs are heated for rolling. The model allows maintenance people to visit the maintenance area beforehand to identify potential safety issues. The virtual model of the strip mill walking beam furnace highlights safe access routes and also points to be aware of such as descaling hatches and burner locations. With virtual glasses,

    There are no items matching the current filter
    There are no more items matching the current filter
    Back to top

    Subscribe

    Media