US/UK/Canada

Share

Pick a time period -
Tags ( Active)

WHB Automotive acquires SinterCast System 4000 process control technology

· Purchase option exercised following six-month extended trial · CGI series production installation at WHB foundry in Curitiba, Brazil · Product development of CGI cylinder blocks and heads underway[Curitiba and Stockholm, 28 May 2020] – Following the conclusion of a comprehensive six-month trial, WHB Automotive, a leading independent automotive components supplier in Brazil, has exercised a purchase option to acquire the SinterCast System 4000 process control equipment.  The acquisition provides WHB with independent capability for full series production of Compacted Graphite Iron (

Notice of the Annual General Meeting of SinterCast AB (publ)

The shareholders of SinterCast AB (publ), reg. no. 556233-6494 (“SinterCast”) are hereby invited to participate in the Annual General Meeting to be held on Tuesday 23 June 2020, 15:00 hours, at the premises of the Royal Swedish Academy of Engineering Sciences (IVA), Grev Turegatan 16, Stockholm, Sweden. Information Related to COVID-19 In consideration of COVID-19 concerns, SinterCast encourages shareholders to not attend the Annual General Meeting. Instead, shareholders are encouraged to vote by post. Information regarding voting by post and a template for voting by post will be made

SinterCast Annual Report 2019

· SinterCast Annual Report 2019 published · Annual General Meeting 2020 to be held 23 June 2020[Stockholm, 19 May 2020] – The Annual Report for 2019 – in English and Swedish versions – has been approved by the Board of Directors of SinterCast. The Annual Report 2019 has been published and is available at www.sintercast.com in PDF-format.  The report includes the CEO Message, the Director’s Report, the Corporate Governance Report and the Financial Statements. The Annual General Meeting 2020 of SinterCast AB (publ) will be held at 15:00 on Tuesday 23 June 2020 at the Royal Swedish

SinterCast withdraws original dividend proposal

Extraordinary General Meeting planned for autumn[Stockholm, 15 May 2020] – Compared to the full year run-rate of 3.3 million Engine Equivalents in 2019, annualised series production decreased to 2.4 million Engine Equivalents in March and further to 1.0 million Engine Equivalents in April. Annualised series production for the first four months of the year is down 25%, from 3.2 million Engine Equivalents in 2019 to 2.4 million Engine Equivalents in 2020. Although the production has started to show signs of recovery in May, the Board of Directors judges that it is still too early to quantify

SinterCast Results January-March 2020

Customer shutdowns in March lead to 6.4% decline in year-on-year first quarter series production First Quarter 2020 · Revenue for Period: SEK 24.6 million (SEK 22.9 million) · Operating Result: SEK 7.9 million (SEK 8.9 million) · Earnings per Share: SEK 0.9 per share (SEK 1.2 per share) · Cashflow from Operations: SEK 9.1 million (SEK 7.2 million) · Uncertain near-term outlook; continued confidence in long-term growth · New order received for large industrial power engine components · Installations at First Automobile Works and Scania planned for mid-year ·

SinterCast postpones Annual Report and AGM

· Publication of Annual Report postponed from 2 April to 19 May 2020 · Annual General Meeting (AGM) postponed from 19 May to 23 June 2020 · AGM Notice to be published on 20 May 2020 · Dividend proposal under review[Stockholm, 30 March 2020] – Series production during January and February remained strong and stable, providing 5.4% year-on-year growth.  Sampling Cup shipments were also up during the first two months of the year, 8% ahead of the full-year 2019 pace. However, during the second-half of March, the development of the COVID-19 corona virus resulted in shutdowns at several

Production starts up; new orders received

· Year-on-year series production up by 5.4% · Start of production for Hyundai 3.0 litre V6 bedplate · New order received for large industrial power components[Stockholm, 17 March 2020] – Annualised series production for the first two months of the year reached 3.1 million Engine Equivalents, providing a 5.4% year-on-year increase.  The sampling volume at customer foundries remained stable at recent run-rates throughout February, providing a positive indication for foundry shipments into March. The start of 2020 has provided new series production opportunities beyond the core

SinterCast Results October—December 2019

Record year for Production, Installations and Operating ResultPositive outlook for 2020 installations Fourth Quarter 2019 · Revenue for Period: SEK 29.3 million (SEK 24.6 million) · Operating Result: SEK 3.8 million (SEK 7.5 million), affected by SEK 4.9 million of non-recurring costs · Earnings per Share: SEK 1.6 per share (SEK 1.4 per share) · Cashflow from Operations: SEK 7.2 million (SEK 4.0 million) · Year-on-year production up 19%; full-year production up 30% · Start of series production at Teksid foundries in Brazil and Mexico · New order received for System

Fagor Ederlan Tafalla foundry upgrades Compacted Graphite Iron production capability

· System 3000 upgrade at Fagor Ederlan foundry in Tafalla, Spain · Product development for commercial vehicle and industrial power applications · Initial prototype production underway[Tafalla and Stockholm, 19 December 2019] – The Fagor Ederlan Group has ordered a capacity and functionality upgrade of the SinterCast Compacted Graphite Iron (CGI) process control system at its foundry in Tafalla, Spain.   The order specifies an upgrade from the initial System 2000 installation to the full System 3000 standard in order to support intensified product development of commercial vehicle and

Teksid begins Compacted Graphite Iron Series production in Brazil and Mexico

· Industrial Power cylinder head production in Monclova, Mexico · Commercial vehicle cylinder block production in Belo Horizonte, Brazil · SinterCast System 3000 Plus capacity upgrade ordered for Teksid do Brasil[Monclova, Belo Horizonte, Torino and Stockholm, 16 December 2019] – Following successful product development, the Teksid group has begun series production of Compacted Graphite Iron (CGI) at its foundries in Monclova, Mexico and Belo Horizonte, Brazil.  The production in Mexico is for large diesel engine cylinder heads used in power generation and transport applications,

First Automobile Works, China to begin SinterCast-CGI series production

· SinterCast System 4000 Plus to be installed at FAW Foundry Number 1 · Series production of heavy-duty Compacted Graphite Iron cylinder block · Thirteen SinterCast-CGI installations in China; 22 installations in Asia[Changchun and Stockholm, 28 November 2019] – Following successful material development and product development with the SinterCast Mini-System 3000 since 2010, First Automobile Works (FAW) has ordered a fully automated System 4000 Plus to support the series production of a new heavy-duty Compacted Graphite Iron (CGI) cylinder block.  Under the terms of the agreement,

SinterCast Results July-September 2019

Year-on-year series production increases by 52% Continued strong Operating Result Third Quarter 2019 · Revenue for Period: SEK 30.8 million (SEK 19.7 million) · Operating Result: SEK 14.5 million (SEK 6.0 million) · Earnings per Share: SEK 2.0 per share (SEK 1.0 per share) · Cashflow from Operations: SEK 16.2 million (SEK 9.9 million) · Record annualised quarterly production of 3.5 million Engine Equivalents · Record annualised monthly production of 3.9 million Engine Equivalents in September · WHB Automotive, Brazil, orders extended trial of SinterCast process

WHB Automotive orders extended trial of SinterCast process control technology

· SinterCast System 4000 to be installed at WHB foundry in Curitiba, Brazil · Process development and market development for CGI cylinder blocks and heads · Extended trial with purchase option during the first quarter of 2020[Curitiba and Stockholm, 29 August 2019] – WHB Automotive S.A., a leading independent automotive components supplier in Brazil, has ordered an extended trial of the SinterCast process control technology for the production of Compacted Graphite Iron (CGI). Under the terms of the agreement, SinterCast will install a System 4000 process control system at the WHB iron

SinterCast Results April-June 2019

25% increase in year-on-year series production Second Quarter 2019 · Revenue for Period: SEK 33.5 million (SEK 26.8 million) · Operating Result: SEK 12.9 million (SEK 11.0 million) · Earnings per Share: SEK 2.0 per share (SEK 1.6 per share) · Cashflow from Operations: SEK 7.2 million (SEK 3.2 million) · Record annualised series production of 3.4 million Engine Equivalents in second quarter · Record annualised monthly production of 3.5 million Engine Equivalents in May · Installation revenue in second quarter surpasses previous full-year average 2019 Year-to-Date

Second consecutive quarter with record series production

· Record annualised series production of 3.4 million Engine Equivalents in second quarter · Record annualised monthly production of 3.5 million Engine Equivalents in May · Installation revenue in second quarter surpasses previous full-year average[Stockholm, 11 July 2019] – Annualised series production reached 3.4 million Engine Equivalents in the second quarter of 2019, surpassing the previous record of 3.1 million Engine Equivalents set in the first quarter. Following two consecutive quarters of record series production, the annualised series production for the first half of 2019 is

SinterCast presents new technologies at GIFA world foundry trade fair

      SinterCast in Hall 10, Stand B39                        System 4000product launch                    SinterCast Cast Tracker [Düsseldorf, 25 June 2019] – At the GIFA world foundry trade fair, held every four years in Düsseldorf, SinterCast has today launched the fourth generation of its Compacted Graphite Iron (CGI) process control technology – the System 4000. SinterCast has also taken the opportunity of the GIFA trade fair to present its new Tracking Technologies – SinterCast Ladle Tracker® and SinterCast Cast Tracker™ – for traceability and process optimisation in

Tupy becomes first foundry to adopt SinterCast Cast Tracker technology

·  Complete traceability for sand cores, moulds and castings; from core assembly to shipping · First Cast Tracker system installed for high volume series production at Tupy Mexico · Applicable to all Compacted Graphite Iron, grey iron and ductile iron production[Joinville and Stockholm, 24 June 2019] – Following a successful eight-month validation trail, Tupy Saltillo has become the first foundry in the world to adopt the complete SinterCast Cast Tracker™ technology. The technology is based on the unique labelling of every core package, together with optical camera recognition of the

SinterCast Annual General Meeting 2019

[Stockholm, 23 May 2019] – The SinterCast AB (publ) Annual General Meeting (AGM) was held on 23 May 2019 in Stockholm. During the AGM, Dr Steve Dawson, President & CEO, presented an overview of recent market activities and provided an outlook for the potential market development. Dr Dawson’s presentation commented on the recent growth from 2.5 million Engine Equivalents in 2018 to 3.4 million Engine Equivalents in March and April 2019. Dr Dawson expressed confidence in continued growth potential for each of the passenger vehicle, commercial vehicle and industrial power sectors, including

SinterCast to confirm new series production and new installation activities at Annual General Meeting

[Stockholm, 23 May 2019] – At the SinterCast AB (publ) Annual General Meeting (AGM) to be held at 15:00 today, Dr Steve Dawson, President & CEO, will confirm new series production programmes and new installation activities for Compacted Graphite Iron (CGI) and for the company’s Tracking Technologies. Dr Dawson will comment on the recent growth from 2.5 million Engine Equivalents in 2018 to the new record level of 3.4 million Engine Equivalents in March 2019, and will confirm that April also finished at 3.4 million. Dr Dawson will express confidence in continued growth in each of the

Kimura Foundry America adopts SinterCast process control technology

· SinterCast Mini-System 3000 to be installed in Kimura US facility during second quarter · Compacted Graphite Iron prototyping and niche volume production capability · Second Mini-System 3000 installation for the Kimura Group[Shelbyville, USA and Stockholm, 14 May 2019] – Kimura Foundry America, Inc., a greenfield cast metal foundry recently established in Shelbyville, Indiana, has entered into a technology supply agreement with the Swedish process control specialist SinterCast for Compacted Graphite Iron (CGI) product development, prototyping and niche volume production. Under the

SinterCast Results January-March 2019

Record series production; positive outlook for 2019 First Quarter 2019 · Revenue for Period: SEK 22.9 million (SEK 16.6 million) · Operating Result: SEK 8.9 million (SEK 4.9 million) · Earnings per Share: SEK 1.2 per share (SEK 0.6 per share) · Cashflow from Operations: SEK 6.9 million (SEK 7.7 million); due to increased operating receivables · Record series production of 3.4 million Engine Equivalents in March · Record series production of 3.1 million Engine Equivalents in first quarter; 24% year-on-year increase · High-volume installation commitment for commercial

Notice of the Annual General Meeting of SinterCast AB (publ)

The shareholders of SinterCast AB (publ), reg. no. 556233-6494 (“SinterCast”) are hereby invited to attend the Annual General Meeting to be held on Thursday 23 May 2019, 15:00 hours, at the premises of the Royal Swedish Academy of Engineering Sciences (IVA), Grev Turegatan 16, Stockholm, Sweden.Right to Participate and to Vote Shareholders who wish to participate in the Annual General Meeting -       must be recorded in the share register maintained by Euroclear Sweden AB on Friday 17 May 2019; and -       must notify SinterCast of their attendance no later than on Friday 17 May

SinterCast Annual Report 2018

· SinterCast Annual Report 2018 published · Annual General Meeting 2019 to be held 23 May 2019[Stockholm, 4 April 2019] – The Annual Report for 2018 – in English and Swedish versions – has been approved by the Board of Directors of SinterCast. The Annual Report 2018 has been published and is available at www.sintercast.com in PDF-format. The report includes the CEO Message, the Director’s Report, the Corporate Governance Report and the Financial Statements. The Annual General Meeting 2019 of SinterCast AB (publ) will be held at 15:00 on Thursday 23 May 2019 at the Royal Swedish

There are no items matching the current filter
There are no more items matching the current filter
Back to top

Media